Usage

13/05/2019

Instructions of usage

1.To Place the nipples, first use compressed air to clean the hole, then carefully screwed the nipples into it (do not damage the thread).
2.To connect the electrodes, when there's 20-30mm distance between the two electrodes, using compressed air to clean the two extremes.
3.Connector locations should be selected c-map.
4.When use the wrenches to connect electrodes, should be fully tighten to specified torque.
5.To avoid electrode broken, please remove the insulating material in the furnace.
6.To avoid electrode broken, pls. place the big block in the lower and smaller block at the upper.

RECOMMENDED TIGHTENING TORQUE

Application

1.Graphite electrodes are used primarily in electric arc furnace steel manufacturing.
2.Graphite electrode can provide high levels of electrical conductivity and capability of sustaining the extremely high levels of generated heat.
3.Graphite electrodes are also used in the refinement of steel and similar smelting processes.
4.Graphite electrodes are also used in gouging operations such as in the forming of a bevel or groove, removing defects in castings or weldments by an arc or gas process. Arc gouging removes material by melting it with the heat of an arc struck between a carbon –graphite electrode and the base metal.compressed air or nitrogen simultaneously blows the molten metal away.